Epson LQ-2190 Original Ribbon Cartridge

Epson
LQ-2190
Original Ribbon Cartridge
Epson ink ribbon for sharp results
Printing is efficient and clear
Ink is engineered not to blot
Designed for quick and easy installation into your printer
Brand
‎Epson
Manufacturer
‎Epson
Colour
‎BLACK
Item Height
‎5 Inches
Item Width
‎4 Inches
Product Dimensions
‎30.48 x 10.16 x 12.7 cm; 200 Grams
Item model number
‎Epson LQ-2190
Are Batteries Included
‎No
Manufacturer
‎Epson
Country of Origin
‎Indonesia
Imported By
‎Epson
Item Weight
‎200 g
Black Fabric Ribbon Cartridge. Designed and engineered to meet the demands of Epson’s fast, high-performance impact printers, genuine Epson ribbons deliver consistently crisp, black output; time and time again. Long-lasting and easy to install, Epson ribbons provide longer life and better character definition
Replacing the ribbon cartridge
Follow these steps to install or replace the ribbon cartridge:
Make sure the printer is turned off.
Open the printer cover to the upright position, then pull it up to remove it.
Warning:
If you have just used the printer, the print head may be hot; let it cool for a few minutes before replacing the ribbon cartridge.
Remove the tension unit by squeezing the tension unit’s lock tabs gently and pulling the tension unit away from the printer.
Make sure that the print head is in the middle of the printer.
If it is not, turn on the printer and then turn off again. Then remove the ribbon cartridge from the printer.
Remove the new ribbon cartridge from its package.
Turn the ribbon-tightening knob in the direction of the arrow to remove any slack from the ribbon so it is easier to install.
Insert the ribbon cartridge into the printer as shown; then press both sides of the cartridge firmly to fit the plastic hooks into the printer slots.
Note:
Do not touch the white cable inside the printer.
Use a pointed object, such as a ball point pen, to guide the ribbon between the print head and ribbon guide.
Turn the ribbon-tightening knob in the direction of the arrow to help feed the ribbon into place; it should not be twisted or creased.
Reinstall the paper tension unit.
Reinstall and close the printer cover.